How to Do a DIY Cabinet Door Upgrade in a Few Simple Steps
I want to share a simple way to give your cabinet doors a fresh look. We're going to use a technique involving fluted cabinet doors to add a unique touch. Let's get started!
Tools and Materials Needed:
- Pole wrap
- Utility knife
- Wood glue
- Pin nails
- Primer
- Paint
- New hardware (optional)
Table of contents
Step 1: Preparing the Inserts
We begin by cutting the pole wrap down to size. This will serve as our inserts for the cabinet doors. Using a utility knife, carefully trim the pole wrap to fit the dimensions of your cabinet doors.
Step 2: Attaching the Inserts
With the inserts ready, it's time to attach them to the cabinet doors.
Apply wood glue along the edges of the inserts and carefully position them on the doors.
Secure them in place using pin nails to ensure they stay put.
Step 3: Priming and Painting
Once the inserts are securely attached, it's time to prime and paint the cabinet doors. This step is crucial for achieving a professional-looking finish.
Apply a coat of primer to the doors and inserts, allowing it to dry completely before moving on to the next step.
Then, choose your desired paint color and apply it evenly to the doors and inserts. Let the paint dry completely before proceeding.
Step 4: Adding New Hardware
To complete the look, consider adding new hardware to your cabinet doors.
Whether you prefer knobs or handles, choosing hardware that complements your newly painted doors can make a big difference in the overall aesthetic.
Upgrading your cabinet doors doesn't have to be complicated or expensive. With just a few simple steps and some basic materials, you can give your kitchen or any room a fresh new look.
Have you upgraded your cabinets? Share your ideas and projects in the comments below.
Comments
Join the conversation
-
Umm.. "Apply wood glue to the edges of the panels" then you promptly squeeze out glue all over the door panel...
I would revise the instructions:
1) cut the panel to size
2) paint the panels - just lay them out and spray paint them. Quick easy and a good finish. Add a poly coat clear after the paint has dried for 24 hours.
3) cut strips of wood the length of the panels (to build a frame for the outer edge of the panels - this will be temporary). Furring strips are cheap and will work fine.
3) spread glue on back of panel (use a small paint roller to get it evenly over the entire panel. It should be a thin layer.)
4) place panel on door. Use the wood strips and clamps to hold the panel in place for the glue to set. Use a wet paper towel to wipe any glue squeeze out. No pin nails, no holes.
-
Oh my, so many people always know the better way & can never be happy with the way someone else has done a project. Could it be because these people weren't first to think of the idea or not first to introduce for public comments? Huuuummm...the world is harsh enough...negative comments are NOT FORCED on these blogs!
Your project is super great! You completed it the way YOU wanted it done! Thanks fir sharing! Keep on submitting your ideas!
Frequently asked questions
Have a question about this project?