How to Build Board and Batten Shutters

Beneath My Heart
by Beneath My Heart

We just completed a makeover on a home near Nashville, Tennessee with Lowe's. It was a chance to give a home a fresh new look for spring after a very harsh winter. The home owner was wanting to add new shutters to their windows, so we built them some board and batten shutters.

Here is our supply list:

1×6 poplar boards

1×4 poplar boards

compound miter saw

wood glue

nail gun and nails (1 1/4″, 18 gauge finish nails)

tape measure

sanding sponges

stain (We used MinWax Dark Walnut.)

rubber gloves and cloths for staining

paint sticks to use as spacers between boards

Our Lowe's helpers cut the boards to length and then assembled the shutters.

(CLICK ON THE LINK to view a short video of the whole process.)

We used paint sticks as "spaces" between the 1x6 board pieces. Then used wood glue and a nail gun to attach the horizontal 1x4 pieces.

After the shutters were built, we sanded the edges, and stained the fronts and backs with MinWax Dark Walnut stain.

So easy, but so beautiful! Check out the complete process by clicking on the link below.


More DIY Projects to Elevate your Home's Value

For more budget-friendly ideas that can significantly increase your home's worth, dive into this inspirational slideshow featuring 10 DIY ways to raise your home's value on a budget.

Beneath My Heart
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
3 of 30 questions
  • Ger69483387 Ger69483387 on Apr 07, 2024

    Could you please advise on how to attach the shutters to the house once they're finished? Thank you

  • Therese Therese on Jun 16, 2024

    Why do the shutters go up to the soffit? I thought shutters were supposed to be same size as the actual glass window.


  • Dee Dee on Jul 05, 2024

    I think the shutters llok absolutely beautiful. Could you tell me how to attach to brick please. We are going to make these. Thank you

Comments
Join the conversation
3 of 136 comments
  • Ron Ron on Sep 05, 2023

    Should have stained the wood before assembly to make sure that the backside of the horizontals was stained, and the front boards where the horizontal is attached. Those areas will still allow moisture to penetrate the wood.

  • Clergylady Clergylady on Dec 19, 2023

    I have been helping with design inspiration on a remodel for a torn up older mobil home used as a rental. I’ve picked out colors ect. I’d like to build these with the salvaged 2x 6 boards from the front porch deck. I can trim off the old ends be I’ll paint it all black for a lovely contrast on silvery gray wood siding. It will really perk up the look across the front. I’ll use pallet boards for the cross pieces.

    The last renters pretty much destroyed the place. We’ve painted walls and ceilings, added new floors and click together vynal flooring, new bath tubs, new kitchen cabinets and counter tops, a new cabinet for a new sink in the master bath and all new surround with the new tub in the second bathroom. The master bath tub replaced a garden tub and added counter top on two sides around the new tub. New vynal bathroom floor coverings. New modern lighting in the kitchen. Painted the front and back doors and replaced part of the siding and gave the outside a fresh coat of paint. The shutters will be just the right trim for the outside. Cutting and trimming the juniper and lilacs and bed of wild roses has already helped the appearance. Rebuilding the front porch sides and deck looks good but was done for safety as well. It looke like a new home but lack something to make the outside look perfect. Shutters is it. Thanks.

Next