Nautical Rope Railing
HEY! I am going to show you how to build a super cool rope railing. I am building it on a new deck but it could easily be done on an existing one, just pop your old railings off and replace them with this one! Or upgrade your dock with this marine feel. Hope you like it!
First you need to cut your posts to size. Mine at 41 inches long because I then made a mark at 6 inches and drew a line with my square.
The reason you markers up 6 inches is for relief cuts.
I set my saw to 2 inches depth and made a ton of little relief cuts from the 6 inch line and down then put the back of my hammer in and popped them out. Its super easy if you make your cuts less the 1/4 width.
Then I used PL Premium glue, put it on my relief cut and place it where I marked out my railings.
I put just one screw in so I could level it before I bolted it with GRK fasteners (aka easier then bolts but just as strong)
Once it was level I used 3 GRK per post
I marked down 7,14 and 21 inches, then drilled a 1 inch hole (because my rope is just under 1 inch in diameter.
You can drill as many or as little amount as you like. Depends on the look you're going for.
Then have fun and string your rope threw the holes!
Im not even sure what these are called but I found them in the plumbing isle. They are plastic so they wont rust or fall apart and once I tied a knot in the rope I placed them on the opposite end of the knot and they held it on perfectly
I later added a 2x4 top rail and some post caps that are solar, Im in love!
Enjoyed the project?
Comments
Join the conversation
-
-
Deneika Coakley on Jun 16, 2020
Thankyou so much!:)
-
-
-
Joanie on Jun 13, 2020
This inspired me. For someone who is near water.....this is a great idea......very, very clever!!
-
Deneika Coakley on Jun 16, 2020
Thanks Joanie! Im glad you got inspired
-
-
Frequently asked questions
Have a question about this project?
What kinda of saw you used and were can I get 1
Can you explain item 7 where it says after you tied the knot you added them(the plastic pieces) to the opposite end of the knot. I am "knot" getting it thru my thick skull what exactly you did.
How to build a pergola?