$5 Curtains

5 Materials

I have come up with a super easy way to make curtains, and for super cheap!

I made my curtains out of cotton sheets that I picked up at Wal-Mart.

Wal-Mart sells these twin size flat sheets for only $5! What a steal! You can't buy curtains, nor fabric for that price. Plus they have several different colors and patterns to choose from. I picked white.

I came up with the idea to use sheets because I needed curtains for our sunroom. I love all of the windows in our sunroom, and really didn't want to cover them up at all, but we do need the privacy. I wanted something lightweight and inexpensive and so I decided to use sheets.

I went to Wal-Mart and picked up 5 twin size sheets (1 panel for each window and the french doors). I pre-washed and ironed each sheet. Then I cut each one in half lengthwise. Next, I hemmed all of the raw edges with my sewing machine.

*Note - depending on the size of your window, you may choose not to cut the sheet in half. However, for an average size window like I have, 1 sheet cut in half will cover the window perfectly.

Next, I created tabs to hang it by. I cut slits into the top hem every couple of inches being careful to only cut the top layer. Make sure to start and end with a slit.

The reason for the slits is that it creates pleats in the curtain once hung.

This helps them to look more like curtains and less like sheets.

The sheets are longer then your average curtain, therefore you get that great puddling on the floor. If you don't like the puddle look you can also cut and hem the bottoms.

I am really happy with the way my curtains turned out. They are just what I needed in our sunroom, They don't cover up too much of the windows, they are lightweight, but they are still thick enough to give us the privacy we wanted.

To see more, please check out my blog at the address below.

Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
The Wicker House
Want more details about this and other DIY projects? Check out my blog post!
Go
Frequently asked questions
Have a question about this project?
3 of 83 questions
  • Veda Grimes Baird Veda Grimes Baird on May 17, 2024

    Can I use inexpensive twin size quilts curtains? With a spring loaded rod?

  • She166608115 She166608115 on Jun 02, 2025

    Has anyone used pillow cases to make curtains for small windows? I’m thinking about trying them for my basement windows.

  • Bau210338623 Bau210338623 Yesterday

    Do the Walmart sheets fade from the sunlight?

Comments
Join the conversation
3 of 1486 comments
  • Cindy Cindy on Mar 21, 2026

    They would make great cafe curtains.


  • Heather Cornwell Heather Cornwell on Jun 14, 2026

    Wish I had a sewing machine... I need like 24 curtains, for 12 windows!!! So expensive!

    • Koshie Graham Wyatt Koshie Graham Wyatt on Oct 29, 2026

      You don't need a sewing machine! Unless all your 12 windows are in the same room, on the same wall, you don't need identical fabric for curtains either! You don't even need fabric in order to cover your windows for privacy. You don't even need curtain rods. You do need a bit of creativity and time.

      Imagine using bubble wrap. All you need is bubble wrap cut to the size of your CLEANED window. and some water. Dampen the glass and smooth on the bubble wrap! Bonus: this provides insulation!

      Similarly, you can use spray starch (for ironing) or a thin slurry of cooked cornstarch and water as a glue to glue wax paper, fabric squares, and other things to panes of glass. Both af these DIY "glues" dry clear and area water soluble for easy removal and quick clean up.

      For decorative (non-moving) panels of fabric hanging on either side of a window, I stapled fabric to corrugated cardboard strips folded into a "V". I stapled the fabric near the point of the "V", then turned the "V" upside down and stapled the plain edge of cardboard to the wall! I've also used duct tape for these purposes.


      But you want nice neat edges on your sheet curtains, right? Well, you certainly need an iron..... and sheets cut to the size you need.... And then you need some more "glue". This time, buy some fabric glue or iron-on tape AND some trim, or fringe, or twine, or...... Glue/iron on your choice of trim at the edges to disguise the raw edge of your curtain. If you are skilled with a hot-glue gun, you can even try using hot glue with a very light hand. Just fold the raw edge over twice about 1/4 to 1/2inch wide, iron it nice and sharp -- and hot glue it down!


      Lastly, if you can't afford full length curtains, don't forget that you can make cafe curtains,

Next