How to Get Rid of Black Mold in Your Shower Caulking
7 Materials
$1
2 Hours
Easy
If you don't want to take the time and the expense to remove and replace your shower or bathtub caulking that is currently moldy, then this is a great way to remove the mold and mold stains that is very affordable and easy! Plus, it works amazing!
So, if you have a bathtub with caulk that looks like this, follow along!
Hometalk Recommends!
Easily get rid of mold with this highly recommended mold stain remover that Amazon reviewers swear by!
You'll need cotton balls, gloves, water, and bleach. Eye protection and a ventilation mask also recommended.
Mix water and bleach together in a small dish, using only a little bleach. Open the window, turn on the fan, and wear gloves!
Dip a cotton ball into the bleach water and then apply the wet cotton ball directly to the caulking around your tub.
If you have moldy spots in the vertical caulking of your tub, stretch out the cotton balls a bit first before dipping them in the bleach water. Start with the highest part and then work your way down as the liquid dripping down will cause the ones below it to fall.
Let the cotton balls stay on the caulking for about 2 hours. Remove one and see if the mold is gone. If not, wait another hour.
If looks good, remove the cotton balls and dispose them in the trash.
You should now have beautiful caulking!
For more tips on using bleach and removing mold from caulking, head to my post (linked at the bottom) for all the details and to check out more of my cleaning tutorials.
And if you like smart tips like this, be sure to check out my ebook Speed Clean the Deep Clean which has more than 50 cleaning tutorials and cleaning tips for all areas of your home.
Resources for this project:
See all materials
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Want more details about this and other DIY projects? Check out my blog post!
Comments
Join the conversation
2 of 633 comments
-
Do not use the bleach on your shower metal doors and leave on. It took the finish off the metal 😥
-
If you wipe the shower and tile after every use you will not have any mold or hard water stains. No need for heavy cleaning
i love Clorox Clean up for everything!
Frequently asked questions
Have a question about this project?
Now, what about the mold between the tiles?
it use a spray bottle with bleach and spray wall tile caulking and bathtub caulking at the same time and therefore not waste cotton balls…???
Exactly why I like my seamless fiberglass shower - no grout to keep clean. Naysay all you want, but how pretty are those tiled walls when a problem like this arises?