Brown paper floor/wall help

Question

I have purchased a brown roll of paper because I wanted a consistent 'vein' look through out the walls and the brown paper bags I was getting would sometimes be 'veiny' and others be 'flat' looking...I am running into the same thing with the roll paper. I have spent at least 40 hours on 3 small walls...$40.00 in glue 40.00 rolled paper not to mention the time...can someone help..how do I get the consistent vein look...I am inches from tearing these walls down and painting...so frustrated.

Z · Answer

Tina, can you tell us the process you are using? That could be what the problem is.

Lee Cunningham Green · Answer

With the roll, I did discover that one side is different than the other, and when they are wet with the glue solution it is difficult to tell the difference. I stained my floor with a dark walnut stain, and you really can't see the difference now. just a rich dark floor. So if you are tearing the paper ahead of time or putting more then one piece in the glue at a time, you may put the other side up on occasion.

AvonelleRed · Answer

Have you been wadding the paper up before you put it in the glue/water mixture? The wrinkles are what helps it to look 'veiny', to me at least.

Tina Brooks · Answer

Thanks for the answers, but I'm still hoping for more ideas.

Susan Moore · Answer

http://redoredux-faywray.blogspot.com/2012/04/paper-bag-wall.html Thought maybe this might help....

Bonnie Medearis · Answer

I had the same problem with some furniture I was covering with paper so I got out my sander and lightly sanded over it all thus giving the entire surface the same texture and then stained the pieces. You may want to try it on a piece of plywood to see if it gives you the effect you want. Good luck. Sorry, I dont have any photos left of the pieces.

Laura Sheehy · Answer

What I did was make sure to tear, not cut, the paper, wad it up so it's more pliable, then after dried, I used a shoe polish, practice different colors and just rub it in circles with a sponge. At least that is what I found worked for me

C · Answer

I've never done the brown paper technique... but did veiny walls in my office with paint. So much easier, faster, and cheaper. I combined a small amount of paint and paint with lots of faux glaze {$40/gallon}, then rolled it on the wall, pressed wrinkled plastic over it & peeled it away.

AvonelleRed · Answer

So I was covering some boards with the brown paper over the weekend, and I figured out that, in addition to wadding up each paper piece, tearing instead of cutting, and so on, that overlapping the papers by quite a bit actually helped to achieve a better overall look. Most of the tutorials I've read about it say don't overlap by much, because overlapping a lot will make it take longer to dry, but in my opinion, it ends up looking much better if you do overlap a lot, and you will also have less spots to have to go back and cover due to shrinkage once the glue/water dries. Your mileage may vary.

Elaine Simmons · Answer

I think it helps to have a rough surface to begin with. I did a bathroom about 10 years ago only did it with copper leaf paint and gold spray paint. I have never done anything where I got more compliments on than that room. Even though you think you might have crushed the paper enough, I crushed it so much that my hands got tired. As AvonelleRed said, it is important to tear instead of cut. I used the roll of brown paper that you buy at the $ store and I even put some rosin paper up along with the brown paper to give it more texture.

C · Answer

Found this hometalkers post that might help :) http://www.hometalk.com/diy/floors-ceilings/blog-worthy-results-without-a-blog-my-version-of-the-paper-bag-floor-4922513

Marilyn Roenneburg · Answer

Sorry, but my post isn't of any help, but more out of curiosity about this procedure, as I have never heard of this process before. So, is the point to achieve a wall that gives the illusion of being old and cracking, or marble like, and how hard is it to remove years later when your sick of it? Also, if anyone has a DYI link to share on this, I would be very appreciative, as I have an older home that actually has some cracking beginning, that I don't care for and thought this might mask those unsightly cracks.

Lth543108 · Answer

The tutorial I used was Bonnie Manning brown bagging. Instructions are on the web if you google it. My bathroom walls turned out great.

Jana Roberts Davis · Answer

After you tear the paper burn the edges a little.

Sun One · Answer

Not sure my post will add anything, but from what I can tell from your photo, you used both sides of the paper, which gave you the variation of color. I can't see that you have much veining either. This is what I did. I used wood glue, not measured carefully, but about 3:1 water:glue. Before I tore the paper from a kraft paper roll bought at Lowes I chose the side I wanted UP and marked the other side with a ballpoint pen, just swirls, etc. enough so that after soaking I could see at least a bit of ink marking on the down side. If I couldn't see the ink I tossed it. I wadded my paper and allowed it to soak in the water/glue mixture for at least 3 to 5 mins. I applied straight glue to my treads (I had a horror of it not sticking), squeezed the paper really hard to get the drippy wet out of it, unwadded, and applied. I had planned on staining, but liked the natural, soooo. I also put some of the paper in a plastic bag to save for repairs if ever needed I would have matching paper. My only regret is now that there are two boys, 12/11, living upstairs that have an affinity for boots, white risers wasn't the best idea. I also used upholstery tacks as an accent. Oh, I also used a brown watercolor pencil to 'adjust' some of the veining.

Sun One · Answer

Marilyn Roenneburg - I feel rather certain it would hide cracking, after filling in the cracks with putty or spackling. When I was doing research my search terms were variations of faux leather paper walls floors. I first saw this technique using tissue paper, paints and stains to achieve a leather look -- on HGTV about .. gads 15? years ago. Soon I am going to be starting a wall using tissue paper.

Jasmin · Answer

I found that when I did these faux looks - you can only use one certain side of the paper. Seems there is often a coating on one side and not the other, so my 'guess' is that a few times, the 'other' side of the paper was used. Best to not use sides with any sort of coating on them.

Tris Smith · Answer

Make sure that you are wadding up the paper good before you apply.

Debbie Miller · Answer

wadding the paper , tearing it into similar sizes, and DO NOT look for consistency... look at the uniqueness and uniformity of the project. It's supposed to be fun not a nightmare

Bev Deardurff · Answer

I kept instructions on brown paper flooring I remember using brown paper, teariing it, and wading each piece up. I can't remember what kind of glue was used. Possibly wall paper glue. I don't remember if you dipped the paper in the glue or if you spread the glue on the floor and then on top. over lap the peices . I don't remember if you applied a coat of glue or not. Let that dry. Apply 2 to 3 coats of polyurathane Let each coat dry . Sand with a 200 grit sand paper. Dust it. Apply polyurathane, etc. Don't sand the last coat. These instructions are as close as I can remember. Bev Deardurff

Linda · Answer

I did this years ago on a bathroom. If I remember,,the more you make the size of the pieces you tear the same,,the more the veining looks like marble. When I finished mine I did 2 coats of polly on it,,,waiting for each coat to dry before the next. It was beautiful and looked like highly polished stone. oh and the glue I used was Elmers white glue, watered down. If you want it not to look so random be sure you use the same side of the paper all the way through the project. I was worried a little about the moisture in a bathroom with the paper,,but after 3 years in the home an it being my master bath,,I have to say it held up great.

Lex263207 · Answer

Completed this process this week. I tore my pieces smaller than most tutorials I've seen. I had some paper from different sources, so I knew to expect variations in color. I didn't like it, so I stained the whole floor in one color, then I stained a second coat in a darker color over the lighter areas. I had to let it sit for a few minutes. I then dabbed it off with a cloth to see if the coverage was ample. I eventually went back over the entire floor, but I came out with a pretty consistent look. I am attaching a couple of photos where you can see the difference before & after the multiple layers of stain. And yes, I did mean to use the words. This is in a upcycle boutique where I sell repurposed items.

Christine Jess Danbrook · Answer

There is two sides to the paper, one side has a rougher texture and other smooth. If you don't want the mixed finish you have to make sure you have the same sides up. Choose which one you like the best and then apply. it will look amazing when your done no matter what...

Pam · Answer

I have done this on table tops, cabinet tops and my coffee table. I can tell you that the dark and light look depended on how much Mod Podge or glue mixture I used to attach the brown paper. If I used a little and stuck it down, it came out light. If I really soaked the paper before attaching it, it would come out darker. I wanted the mixture so I would use less glue, by that I mean I put glue on table and then the paper on top and smoothed it down with dry rags to make sure it was attached well. Then, when all was covered, I tore smaller pieces of paper and put glue on the paper so as to saturate it more and then placed them at random over the table to have darker colored mixed in to look like stone. P.S. I didn't scrunch up the paper first. I wanted a smother look to the stone look.

Buster Evans · Answer

A friend of mine did the brown paper bags and used wax shoe polish (in the flat tins) to color it either in neutral, or light brown, to brown.. Looked like LEATHER it was awesome.. 
 I found some marble colored gray/blue wall paper, several rolls of it at the thrift store... there was one thing I discovered about tearing, when you tear it upward it leaves the white paper showing and downward the colored part is left showing.. Overlap and if you want veins connect pieces in the direction of the vein you want.. when you color it the vein will show... make your pieces all different sizes but use you edges to make the vein effect... If you dont like a spot just glue another piece over it....
 We used regular white glue and water to make the adhesive... does not take a lot of glue just keep it shaken so its mixed well...

Tina Brooks · Answer

Thank you everyone!!! I have said 'enough' I am not going to beat myself up anymore, lol!!!! I have the paper in place and am now staining with a fruitwood stain...I think i'll add 2-3 and then poly, I will let everyone know how it looks! Thank you everyone for all your help, it was very much appreciated!

Vickie Goyen · Answer

I also think you have to tear each piece in the same direction-either pull towards you and down or tear up and away from you

Shiree McCarver · Answer

For the best result you need to ball the paper then smooth out to get the veins, also it helps to try to utilize paper from the same roll, because no two papers are alike unless they came off the same machine.

Marci N · Answer

I have heard, not tried it yet since I moved from the house I did this in. But if you rub it with wax -have no clue what kind- but it will then look like burnished leather instead of suede. You can paint over the paper too, Though I loved the look. If you wanted it all the same shade you would have to be very careful to only use the one side of the paper, and yes the same roll too.

Marci N · Answer

I took another look at your picture, I think the problem is that you need to add in the old paper to the middle. That way it look haphazard instead of one thing then another. The top is different paper, you could simply finish the top with the darker paper and it would look OK. Or a big painting on the wall will make it look cool. Love your couch. If you want to be artistic leave the dark and paint indian ponies running across it.

Brown paper floor/wall help

Blog Worthy Results Without a Blog, My Version of the Paper Bag Floor

Suggested Project Book

30 Of The Best DIY Mirror Projects Ever Made

Other

More

Brown paper floor/wall help

Blog Worthy Results Without a Blog, My Version of the Paper Bag Floor

Suggested Project Book