How To Make a Rug From Table Runners: A Cheap and Easy DIY Project
If you're looking to add a touch of coziness to your home without spending a fortune, making a rug from thrift store table runners is a fantastic and budget-friendly solution.
In this step-by-step guide, I'll walk you through the process of creating a unique homemade rug using simple materials and minimal effort.
Let's dive in!
This post was transcribed by a member of the Hometalk editorial team from the original HometalkTV episode.
Tools and Materials:
Hometalk may receive a small affiliate commission from purchases made via Amazon links in this article but at no cost to you.
1. Selecting the Table Runners
Start your rug craft project by choosing a couple of table runners from the thrift store. Look for variety in textures and patterns.
I used two thick woven table runners and one long gingham-patterned runner.
Lay out your runners and If you have one that is longer, trim it down to the correct size.
2. Attach Your Table Runners
Once you have trimmed your pieces down, place 2 table runners on a flat surface with the good side facing down and the backsides facing up.
Opting for a no-sew approach, use strong duct tape to secure the table runners together.
Take your time to align everything accurately and press the tape firmly along the seams.
Once you have attached the first two, add a third.
Lay the runner down with the good side facing down, and let the middle rug slightly overlap the final runner.
Attach them with tape.
4. Ensuring Even Edges
Flip the rug over to check that the edges are even all the way around.
If adjustments are needed, flip the rug back over and old and press the excess material down.
Then, secure it with duct tape.
More Rug DIY’s
How to Make a Rug From Table Runners
Once the rug is assembled and the edges are perfected, find the ideal spot in your home to showcase your creation.
I placed my DIY rug in a cozy nook, instantly giving the space a touch of warmth.
So, next time you're at the thrift store, grab a few table runners and embark on your rug-making journey.
Share your creations in the comments below!
Comments
Join the conversation
-
Prewash , to prevent shrinkage. Replace duct tape with iron on sewing tape so that you can wash it. To keep cleaner, coat with watered down decoupage glue..
-
Iron when done.
Frequently asked questions
Have a question about this project?