A DIY Sparkle Ball Light - These Are Awesome!

by
Jennifer | CrazyDiyMom
(IC: blogger)
Let me just start by saying I am now obsessed with these. I made one and ran back to the store for more lights and cups!
Get the full DIY here at CrazyDiyMom
Get the full DIY here at CrazyDiyMom
You need 50 9 oz short solo cups - I used the short fat party sized ones
Cut an X into the bottom of all 50 solo cups
Take 12 cups and staple them together on their sides to form a complete circle. This will be the bottom row and you will build on top of it.
Your next row of cups consists of 9 cups. You can use clothespins to help hold your cups in place if you feel you need more hands. Staple these cups to the cups below them and alongside them. Once you have that row done, use 4 cups to fill in the top. Again, staple them to the row below and the cups along side each other.
Once you have both halves of your sparkle ball done you are ready for the lights. Locate the plug in end of your lights and make sure they are left outside of the ball. Starting at that end, begin poking your lights through the back of the cup. Work your way down the string and around. Put the lights into both halves of the sparkle ball.
Once all the lights are in, put the two halves together to form the ball. Then you need to staple each half to the other one. This is where I used the clothes pins to help hold everything together.
Ta da! Plug it in and admire it. And as with all lights/lamps - do not leave plugged in unsupervised.
Enjoyed the project?

Want more details about this and other DIY projects? Check out my blog post!
Published January 6th, 2017 10:00 AM
Comments
Join the conversation
3 of 89 comments
-
Beverly Story Palmer on Nov 29, 2017
I am making two one for home and one for our camp trailer at the beach.
-
-
KWP51142897 on May 07, 2021
Can 12 oz cups be used
-
Jennifer | CrazyDiyMom on May 07, 2021
Most cups will work, but it really depends on the shape and if they fit together nicely to make a sturdy finished ball. I hope that makes sense 😊
-
-
Frequently asked questions
Have a question about this project?
My neighbor is trying to make these. They have tried 3 different staplers and aren't having any luck. Do you use a specific stapler?
Can you tell me where you got your short clear cups? The ones I found here at Wal-mart were hazy looking not clear like yours are????
can you use a off brand of cup?