Great Solution: Wood Look Vinyl Tile on a Stair
Have a highly utilized stair in your home that needs new flooring? Tight on cash? Why not try peel and stick wood look vinyl tiles for a clean look that’s easy to maintain.
Product links may be affiliate links which are no extra cost to you but your purchase helps me help you with more fantastic projects!
Our back stair is a disaster. In fact, I'm so embarrassed by it, please don't focus on the before shot. Well other than maybe Finn.
Point being, it's a mess. Originally it was carpeted by the flipper which I ripped out immediately due to its impracticality. Since then, I painted the stairs and threw down a utilitarian runner.
My goal for this way-to-tight-and-narrow space that leads directly into our muddy backyard? Minimize the mess, or at least make it easier to clean. Here I pulled up the runner and was ready to go. Complete with shadow.
Next step was adhesive primer. Always a good idea to prime and it is recommended. I put down two coats.
Be sure to come by my blog, Flipping the Flip, to read all the extra tips and details about this project and so many other fun ones!
I picked up these wood-look peel and stick planks from Lowes.
Here's a great cutting tip: if you've got a shorty filler you need trimmed, butt a piece up against your finish line, lay a full piece over it and align that with the opposite edge. The edge closest to your piece in need of trimming is your exact cutting line.
For more details and information about this technique as well as a few other handy tips on cutting this material, please be sure to stop by the blog post.
Cutting this stuff with a utlility knife was much easier than I anticipated which is super great. Score a couple times, bend it back and it snaps apart. Nice!
Because of the nature of stairs, I couldn't get a weighted roller on there so I used a clean rag and myself. Figured hey, close enough, right?
It didn't take too long and for less than $45, we now have an easy to clean, easy to maintain floor that looks good, didn't break the bank, and helps keep the mess to a minimum.
Because we have Finn, and vinyl isn't truly slip-proof, the runner went back in. All in all I'm quite pleased!
Be sure to drop by Flipping the Flip to discover loads more great DIY projects, ideas, and inspiration!
Plus subscribe here to be first in the know on new projects!
Resources for this project:
See all materials
Comments
Join the conversation
-
Would this work over concrete stairs? We live in a condo and the stairs are concrete. I want to pull the carpet thats over it and I'm not sure if vinyl over the stairs is best or a prefinished stair.
-
Try a test first. The adhesives on these vinyl planks aren't particularly strong. You can glue these down with something stronger but then know removing them should you need to would likely be a mess. Good luck, I hope it works out for you!
-
-
Looks great!
-
Thank you!
-
Frequently asked questions
Have a question about this project?
Is it still holding up today? I showed this to my husband and he was wondering if it still look great today.
I am a little confused as to how you got it to bend for front part. Did you video the process?
Thanks
Did you do anything special to finish the stair nose or just match the edges well? My stair nose is rounded, so I need to trim this down so it’s flush/ square