200K Views
DIY Tiered Baseball Snack or Cupcake Display Stand
by
Chloe Crabtree
(IC: blogger)
6 Materials
I wanted to create a tiered stand for displaying treats when everyone comes over to watch a baseball game. It was time to get creative!
I purchased a dozen baseballs and drilled holes all the way through five of them with a 7/8" drill bit.
At Hobby Lobby I found a wooden platter that was 14" across and some wood circles 10" and 6 1/2".
The smaller circles were thin, so I glued two of them together with wood glue to give them more stability.
I used the 7/8" drill bit and drilled a hole through the center of each of the re-enforced circles and the wooden platter.
I painted all of the circles white and painted a 7/8" dowel white.
I used an industrial strength adhesive to glue four balls (un-drilled) to the base of the platter for 'feet'.
I used a fine black Sharpie and a red Sharpie to draw the stitching onto the discs and the platter.
This is starting to look like a baseball theme!
I took the balls I had drilled through and stacked onto the dowel, fed it through the discs and the platter. For the bottom of the dowel, I drilled partially through a baseball and glued it onto the bottom of the dowel. A small dollop of adhesive was added to the baseballs above and below the discs for extra stability.
At the top I used one baseball, also only partially drilled and glued it to the top of the dowel. There you have it, a fun themed cupcake or snack stand ready for all of your baseball fans, or your favorite local team!
Enjoyed the project?
Suggested materials:
- Wooden Circles (Hobby Lobby)
- Wooden Platter (Hobby Lobby)
- 7/8" Dowel Rod (Hobby Lobby)
- Red Sharpie (Walmart)
- White Paint (Walmart)
- Baseballs (Target)
Want more details about this and other DIY projects? Check out my blog post!
Published April 3rd, 2017 7:50 PM
Comments
Join the conversation
2 of 36 comments
-
ScrappyGeek.com on Jul 30, 2018
What a fun project! We're always looking for sports themed ideas - well done!
-
-
Karen Mandart on Feb 26, 2019
What a great project - came out beautifully-bet any guy would like using it too!
-
Frequently asked questions
Have a question about this project?
Loveeeee it!!! What industrial glue did you use?? Thank you!
Do you think it would stand properly without the 4 balls on the bottom as feet?
How did you secure the dowel to the bottom plate so that it doesn't move/tip?